Description
ALPINE SWT-S10 & BBX-T600 SUB/AMP PACKAGE!
Tube enclosure type
Size (WxL) Ø285 x 600 mm
Push SPK Teminal
Alpine Logo Embroidery
SPECIFICATIONS:
10” Woofer size
Passive Woofer type
1,200 W Max Power
250 W Rating Power
35-200 Hz frequency response
> 90 dB Sensitivity
ALPINE BBX-T600 AMPLIFIER
SPECIFICATIONS:
- Amplifier Type: Class-A/B
- Channel Design: 2/1 Channel
- Thermal Control: Thermal Management Control
- Power Supply: DC-DC PWM Power Supply
- Power Supply Design: MOSFET Power
- Current Protection: Over-Current, Over-Voltage and Thermal Protection
- Crossover: Variable Low-Pass / High-Pass
- Green/red Status LED
- 1 pair RCA pre-inputs
- 1 pair RCA pre-outputs
- Total Max Power: 300W
- Per Channel into 4ohms (≤1%THD+N): 2 x 50W
- Per Channel into 2ohms (≤1%THD+N): 2 x 70W
- Bridged into 4ohms (≤1%THD+N): 1 x 130W
- Crossover Frequency (Variable, OFF/LPF/HPF Selectable)
- 1/2 Ch: LP: 50Hz – 250Hz HP: 80Hz – 1.2kHz
- EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to +12dB
- Footprint: 250 mm x 52 mm x 240 mm
- Power Requirements: 14.4 V DC (11 V to 16 V)
- Input Sensitivity: 0.2 – 8.0 V
- Frequency Response: 5 Hz – 50 kHz (+ 0,-3 dB)
- Speaker Impedance: 4 or 2 Ω
- Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB
