09 630 0677 dsmteden@xtra.co.nz

415 Dominion Road, Mt Eden, Auckland 1024

Sale!

ROCKFORD FOSGATE 2X T1D410 10INCH SUBWOOFERS & ROCKFORD FOSGATE T1000-1BDCP MONOBLOCK AMP PACKAGE!TOP SUBS

$3,297.00 $2,899.00

1 in stock

Description

THIS IS A PACKAGE FOR 2X T1D410 ROCKFORD FOSGATE 10INCH T1 SERIES SUBWOOFERS WITH T1000-1BDCP MONOBLOCK AMPLIFIER

***THIS ITEM IS AVAILABLE IN STORE ONLY***SHOULD YOU WISH TO FREIGHT THIS DEAL, PLEASE EMAIL US FOR FREIGHT COSTS AS IT IS A LARGE ITEM AND STANDARD COURIER WILL NOT DELIVER. EXTRA FREIGHT COSTS WILL APPLY DEPENDING ON THE LOCATION!

The Power Series T1D410 Dual 4-Ohm subwoofer builds on innovative new Rockford Fosgate technologies. These bad boys have patented VAST technology that increases surface cone area up to 25% so the T1D410 performs like a much larger woofer over the previous model. The new FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech and ready to set off car alarms, the T1D410 is here!

  • Symmetrical dual progressive roll tear resistant poly-cotton spiders
  • Periodic-stitched fatigue resistant tinsel lead wire
  • Proprietary 8 AWG insulated allmetal input spring terminal connection
  • High-temp voice coil with spun-laced Nomex® re-inforcement collar
  • Optimized and matched magnetic and complicance geometry
  • Anodized aluminum heat sinking dust cap
  • Kevlar fiber reinforced paper cone
  • Rigid die-cast aluminum basket
  • Optimized pole piece and spider venting
  • Anodized aluminum voice coil former / copper clad aluminum wire
Size
10″
Power Handling (Watts RMS)
600 Watts RMS
1200 Watts Max
Magnet Weight (oz)
100 oz. (2.84 kg)
Voice Coil Diameter
3″ (75.4mm)
SPL (dB @ 1w/1m)
83
Fs (Hz)
36
Qes
0.73
Cutout Diameter
9.0625 in. (230 mm)
Woofer Displacement
0.078 cu. ft. (2.2 Litres)
Sd (cm2)
345
Nominal Impedance
Dual 4-Ohm
Speaker Connector
Compression Terminal
Mounting Depth
6.375 in. (161.9 mm)
Qts
0.65
Qms
5.70
Vas (Litres)
15.7
Xmax (mm)
16
Re (Ohms)
6.50
Le (mH)
2.5
CEA-2031 Compliant
CEA-2031 Guidelines
Subwoofer Type
Standard
Voice Coil Type
Dual Voice Coil
Sealed Box Volume (Vb)
0.75 cu. ft. (21.2 Litres)
Vented Box Volume (Vb)
1.5 cu. ft. (42.4 Litres)

The Power T1000-1bd is a 1,000 Watt mono amplifier featuring delivering up to 25% more power across all impedance loads. The frequency response of the T1000-1bd is optimized exclusively for use with subwoofers.

  • 24dB/octave crossover
  • 4 Gauge power/ground connectors
  • Audiophile grade speaker connections
  • MOSFET power supply
  • MOSFET output stage
  • RCA pass-thru outputs
  • Infrasonic filter

CEA-2006 Compliant:
Number of Channels: 1
Rated Power
(RMS Continuous Power):
700 Watts x 1 @ 4-Ohm
1000 Watts x 1 @ 2-Ohm
1000 Watts x 1 @ 1-Ohm
Total Power
(Sum of Rated Power):
1000 Watts RMS
Dynamic Power
(PVC/PowerCube® Measurement):
956Watts x 1 @ 4-Ohms
1573 Watts x 1 @ 2-Ohms
1627 Watts x 1 @ 1-Ohm
Bridgeable: No
Frequency Response: 20Hz to 250Hz +/-0.5dB
Efficiency (average): 85.6% @ 4-Ohm
82.1% @ 2-Ohm
70% @ 1-Ohm
Total Harmonic Distortion(THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Crossover Controls: Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth
Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz
Tone Controls: Bass: 0dB to +18dB @ 45Hz
Input Sensitivity: 150 mV to 4 V
Signal Input: 1 RCA pair
Signal Output: 1 RCA pair
Power Input Connector: Block
Power Wire Gauge: 4 AWG
Speaker Output Connector: Block
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Remote PEQ
(overrides built-in Punch Bass)
Visual Indicators: Power (Blue LED)
Thermal (Red LED)
Protect (Yellow LED)
Circuit Topology Class: Class-BD
Operating Voltage: 9 – 16 VDC
Recommended Fuse
(not included):
150 A
Max. Current Draw (13.8V Sine wave): 140 A
Average Current Draw (13.8V Music): 70 A
Suggested Alternator: 100 A
Dimensions (HxWxL): 2.14 x 8.14 x 13.66 (in)
5.44 x 20.68 x 34.69 (cm)

 

 

 

Additional information

Weight 30.00 kg
X