***THIS PRODUCT IS TOO HEAVY FOR SHIPPING SO PLEASE INQUIRE SHIPPING COSTS PRIOR TO PURCHASING**PICKUP IN-STORE ONLY**
Rockford Fosgate’s P1-1X10 ported enclosure fills your ride with juicy, high-volume bass, so you and your passengers can rock out to the latest beats. The enclosure’s Punch P1 10″ woofer features a paper cone reinforced with Kevlar fibers, supported by a rubber surround. The heavy-duty motor assembly and advanced cooling vents allow this sub to handle up to 250 watts RMS without flinching.
- ported hatchback-style enclosure with one 10″ Punch P1 subwoofer
- 5/8″ medium density fiberboard construction covered with black carpet
- 4-ohm total impedance
- power handling: 50-250 watts RMS
- peak power: 500 watts
- frequency response: 30-250 Hz
- sensitivity: 85 dB
- 17-1/16″W x 13-1/4″H x 16-1/8″D1 x 13-7/8″D2
|Woofer Size (inches)||10|
|Pieces in System||1|
|Second Depth (inches)||13-7/8|
|Connector Type||Spring post|
|Frequency Response||30-250 Hz|
|Power Range (Watts RMS)||50-250|
Punch Woofer: The enclosure houses one front-firing Rockford Fosgate Punch P1S4-10 10″ subwoofer. The 4-ohm, single voice coil sub features a Stamp Cast steel frame, a Kevlar fibre reinforced paper cone, and NBR surround (Nitrile Butadiene Rubber). An anodized aluminium voice coil former and spider venting help keep the subwoofer cool.
Spider: A compliant linear spider made from tear and fatigue resistant poly-cotton improves mechanical stability under high excursion, maintaining consistent excursion characteristics.
Solid MDF Construction: The enclosure is constructed of high quality 5/8″ MDF (medium-density fibreboard), which resists flexing and has anti-resonant qualities.
Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of one front firing 10″ Punch P1 series subwoofer with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.
Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.
Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.
Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.
Power Handling: The subwoofer can handle up to 250 watts RMS; 500 watts peak power.
CEA-2031 Compliant: Power handling on the P1S4-10 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.
Dimensions: The depth dimensions listed in Features & Specs include the subwoofer’s trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-1/4 inches at the base and 13 inches at the top.
Prime 500 Watt Mono Amplifier R2-500X1
Primed for Performance, the R2-500X1 is a 500 watt, class-D amplifier, capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. Perfect for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.
R2 Amplifier Product Overview
Rockford Fosgate’s R2 amplifiers are the building blocks for great audio systems, powerful enough to even DRIVE our Punch speakers and subwoofers. They have undergone an amazing upgrade by packing them with the latest features at an incredible value. Best of all, they are designed and engineered here in Tempe, Arizona.
300W x 1 @ 4Ω
(Sum of Rated Power)
(RMS Continuous Power)
500 Watts x 1 @ 2Ω
590 Watts x 1 @ 2Ω
High-Level: 450 mV – 12 V
High-Level: 4-Pin Molex
(Pass-Thru active with RCA or Hi-Level input)
50 Hz – 250 Hz @ 12dB/Octave Butterworth Infrasonic:
15 Hz – 40 Hz @ 12dB/Octave Butterworth
(4.9 cm x 17.3 cm x 21.5 cm)