09 630 0677 dsmteden@xtra.co.nz

415 Dominion Road, Mt Eden, Auckland 1024

Sale!

ROCKFORD FOSGATE P2-2X12 DUAL 12INCH LOADED SUBWOOFERS+PRIME R750-1D AMP COMBO!

$1,738.00 $1,199.00

1 in stock

Description

**PLEASE NOTE: THIS IS A VERY HEAVY ITEM. THEREFORE SHOP PICKUP ONLY* PRIOR ARRANGEMENTS NEED TO BE MADE SHOULD YOU WISH TO GET IT FREIGHTED* YOU CAN EMAIL US DEPENDING ON THE LOCATION SO WE CAN LET YOU KNOW THE COST OF FREIGHT.**

 

Punch Dual P2 12″ Loaded Enclosure P2-2X12

The P2-2X12 is a dual P2 12” vented enclosure with 800 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We’re not talking junk in the trunk, we’re talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8″ MDF and tuned by our computer aided design software. P2 Loaded Enclosures feature similar tonal performance as P1 models, but with more power handling capacity.

  • Proprietary high-flow, low-noise port
  • Constructed with 5/8″ MDF
  • High current binding posts
Woofer Quantity
2
Woofer Size
12″
Woofer Series
Punch P2 (P2D4-12)
Nominal Impedance (ea)
1-Ohm
Internally wired to create a 1-Ohm amplifier load
Power Handling (Watts RMS)
800 Watts RMS
1600 Watts Max
PLUS
ROCKFORD R750-1D PRIME AMPLIFIER
Prime 750 Watt Class-D Mono Amplifier R750-1D

The PRIME R750-1D is an ultra-efficient mono amplifier that can produce 750 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R750-1D is optimized exclusively for use with subwoofers.

This amplifier is optimized for subwoofers with the implementation of an infrasonic filter to keep those ultra-low (inaudible) bass notes from damaging your subwoofer system. Match with a 4-channel stereo amplifier for your mids/highs and you’ll have a Rockford Fosgate system that any Car Audio Fanatic will envy.

  • 12dB/octave Butterworth crossover
  • Infrasonic filter
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Remote PLC (Punch Level Control)
  • RCA pass-thru outputs
  • Real time output and power supply thermal sensing
  • Cast aluminium heatsink
  • Top mounted controls
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • Short circuit protection
  • Muted turn on
CEA-2006 Compliant
CEA-2006 Guidelines CEA-2006 Power Rating
250W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels
4
Total Power
(Sum of Rated Power)
750 Watts RMS
Rated Power
(RMS Continuous Power)
250 Watts x 1 @ 4-Ohm
500 Watts x 1 @ 2-Ohm
750 Watts x 1 @ 1-Ohm
Dynamic Power
(PVC/PowerCube®)
310 Watts x 1 @ 4-Ohms 0° Res
567 Watts x 1 @ 2-Ohms 0° Res
966 Watts x 1 @ 1-Ohm 0° Res
Bridgeable
No
Frequency Response
20Hz to 250Hz +/-1dB
Input Sensitivity
150 mV to 4 V
Circuit Topology Class
Class D
Efficiency (average)
85% @ 4-Ohm
85% @ 2-Ohm
80% @ 1-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Signal Input
Low Level: 1 RCA Pair
Signal Output
Low Level: 1 RCA Pair
Tone Controls
0dB to +18dB @ 45Hz
Crossover Controls
Low-Pass: Variable 50Hz – 500Hz @ 12dB/Octave
Infrasonic:
Remote Controls
Punch Level Control
(when connected, is linked to “gain control” to provide remote output level)
Visual Indicators
Power
Protect
Power Wire Gauge
4 AWG
Power Input Connector
Block
Speaker Wire Gauge
12 AWG
Speaker Output Connector
Block
Cooling
Convection
Heatsink
Operating Voltage
9 – 16 VDC
Recommended Fuse
(not included)
100 A
Average Current Draw (13.8V Music)
40 A
Max. Current Draw (13.8V Sinewave)
80 A
Suggested Alternator
75 A
Dimensional Diagram
Dimensions (H x W x D)
(5cm x 17.20cm x 23.10cm)

 

Additional information

Weight 55.00 kg
X