Description
The PRIME R300X4 is a versatile 4-channel amplifier capable of running your entire system. The R300X4 is great for full-range or component speakers on the front channels with subwoofers on the rear running in bridged/mono mode.
- 12dB/octave Butterworth crossover
- 0/6/12 dB On Board Punch EQ Control
- 2/4 channel input switch
- High Level Input (4-pin)
- Separate Front and Rear Gain Control
- Real time output and power supply thermal sensing
- Cast aluminum heat sink
- 4 Gauge power/ground connectors
- MOSFET power supply
- Over current protection
- Short circuit protection
- Muted turn on
CEA-2006 Power Rating
50W x 4 @ 4Ω
≤1.0% THD+N |
50 Watts x 4 @ 4-Ohm
75 Watts x 4 @ 2-Ohm
150 Watts x 2 @ 4-Ohm Bridged |
76 Watts x 4 @ 4-Ohms 0° Res
100 Watts x 4 @ 2-Ohms 0° Res |
4-Ohm: <1.0%
2-Ohm: <1.0% |
Front Channels
High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth
Rear Channels
High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth |
Front Channels
Punch Bass: 0dB/+6dB/+12dB @ 45Hz
Rear Channels
Punch Bass: 0dB/+6dB/+12dB @ 45Hz
Function works when crossover in (LP) position |
1.98 x 6.77 x 13.19 (in)
5 x 17.2 x 33.5 (cm) |