09 630 0677 dsmteden@xtra.co.nz

415 Dominion Road, Mt Eden, Auckland 1024

Sale!

ROCKFORD FOSGATE T0D412 X 2 12INCH DUAL 4OHM SUBWOOFERS+T1500-1BDCP MONOBLOCK AMPLIFIER PACKAGE!

$3,600.00 $2,999.00

1 in stock

Description

**PLEASE NOTE**THIS IS A VERY HEAVY ITEM. THIS IS FOR IN-STORE PURCHASE ONLY. SHOULD YOU WISH TO FREIGHT THIS ITEM, PLEASE SEND US AN INQUIRY FOR THE FREIGHT COSTS- FREIGHT COSTS VARY DEPENDING ON LOCATION.

The T0D412 12″ 4-ohm Dual Voice Coil subwoofer mimics the performance and design from its older Power Series brothers. The T0 subwoofers feature VAST technology that increases surface cone area up to 25% so it performs like a much larger woofer. The FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech, and high power handling characteristics let this subwoofer wear the torture-tested “Power Series” badge!

  • Anodized aluminium heat sinking dust cap
  • Anodized aluminium voice coil former
  • High-temp voice coil with spun-laced Nomex® re-inforcement collar
  • Kevlar fibre reinforced paper cone
  • Optimized and matched magnetic and compliance geometry
  • Optimized pole piece and spider venting
  • Periodic-stitched fatigue resistant tinsel lead wire
  • Proprietary 8 AWG insulated all metal input spring terminal connection
  • Rigid die-cast aluminium basket

SPECIFICATIONS:

Nominal Impedance
Dual 4-Ohm
Speaker Connector
Compression Terminal
Mounting Depth
6.875 in. (174.6 mm)
SPL (dB @ 1w/1m)
84.1
Fs (Hz)
26
Qts
0.53
Qes
0.58
Qms
6.00
Re (Ohms)
6.20
Le (mH)
8.4
Size
12″
Voice Coil Diameter
3″ (75.5 mm)
Vas (Litres)
55.1
Xmax (mm)
14.8
Cutout Diameter
11.25 in. (285 mm)
Woofer Displacement
0.106 cu. ft. (3.0 Liters)
Power Handling (Watts RMS)
700 Watts RMS
1400 Watts Max
Magnet Weight (oz)
106 oz. (3.00 Kg.)
CEA-2031 Compliant
CEA-2031 Guidelines
Sd (cm2)
548

T1500-1bdCP

Power 1,500 Watt Class-bd Constant Power Amplifier

The Power T1500-1bdCP is a 1,500 Watt mono amplifier featuring Constant Power delivering up to 25% more power across all impedance loads. The frequency response of the T1500-1bdCP is optimized exclusively for use with subwoofers in cars and trucks.
The T1500-1bdCP 1500-watt amp includes:

24dB/octave crossover

  • MOSFET power supply
  • MOSFET output stage
  • 4 Gauge power/ground connectors
  • Audiophile grade speaker connections
  • RCA pass-thru outputs
  • Infrasonic filter

T1500-1bdCP

The new Constant Power amplifiers are the most powerful amplifiers on the market PERIOD! The T1500-1bdCP is an amplifier for subwoofers based on the legendary T1500-1bd amplifier design with a proprietary “Constant Power” configuration delivering up to 25% more power (Watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. At 1,500 watts, this monster will run any demo vehicle competing in Sound Pressure Level.

CEA-2006 Compliant: CEA-2006 Power Rating
1000W x 1 @ 4Ω
≤1.0% THD+N

Number of Channels: 1

Rated Power
(RMS Continuous Power):
1000 Watts x 1 @ 4-Ohm
1500 Watts x 1 @ 2-Ohm
1500 Watts x 1 @ 1-Ohm

Total Power
(Sum of Rated Power):
1500 Watts RMS

Dynamic Power
(PVC/PowerCube®):
1045 Watts x 1 @ 4-Ohms
1549 Watts x 1 @ 2-Ohms
1715 Watts x 1 @ 1-Ohm

Bridgeable: No

Frequency Response: 20Hz to 250Hz +/- 0.5dB

Efficiency (average): 86.2% @ 4-Ohm
74.6% @ 2-Ohm
63.0% @ 1-Ohm

Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%

Crossover Controls: Low-Pass (LP): 35-250Hz 24dB/octave Butterworth

Tone Controls: Bass: 0dB to +18dB @ 45Hz
Infrasonic Filter: -3dB @ 28Hz 12dB/Octave

Input Sensitivity: 150 mV to 5 V

Signal Input: Low level: 1 RCA pair

Signal Output: Low Level: 1 RCA pair

Power Input Connector: Block

Power Wire Gauge: 4 AWG

Speaker Output Connector: Screw terminal barrier strip

Speaker Wire Gauge: 8 AWG to 18 AWG

Heat Sink Type: Cast aluminium

Cooling: Convection

Remote Controls: Optional Remote Punch Bass EQ
(overrides built-in Punch Bass EQ)

Visual Indicators: Power
Thermal
Protect

Circuit Topology Class: Class-BD

Operating Voltage: 9 – 16 VDC

Recommended Fuse
(not included):
200 A

Max. Current Draw (13.8V Sinewave): 200 A

Average Current Draw (13.8V Music): 100 A

Suggested Alternator: 100 A

Shipping Weight: 14.35 Lbs. (6.50 Kg.)

Dimensions (H x W x D): 2.14 x 8.14 x 14.91 (in)
5.42 x 20.68 x 37.86 (cm)

Additional information

Weight 65.00 kg
X