09 630 0677 dsmteden@xtra.co.nz

415 Dominion Road, Mt Eden, Auckland 1024

Sale!

ROCKFORD P1-2X12 DUAL 12INCH LOADED SUB & R500X1D AMPLIFIER PACKAGE

$1,299.00 $899.00

1 in stock

Description

Punch Dual P1 12″ Loaded Enclosure
***THIS PACK IS ONLY AVAILABLE UPON PICKUP IN-STORE.
***SHOULD YOU WISH DELIVERY, PLEASE ASK US FOR A QUOTE ON FREIGHT BEFORE PURCHASING

P1-2X12

The P1-2X12 is a dual P1 12” vented enclosure with 500 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We’re not talking junk in the trunk, we’re talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8″ MDF and tuned by our computer aided design software. P1 Loaded Enclosures feature similar tonal performance as P2/P3 models, but are easier to move in-n-out of vehicles due to their lighter weight.

•Constructed with 5/8″ MDF
•Proprietary high-flow, low-noise port
•High current binding posts

Woofer Quantity
2
Woofer Series
Punch P1 (P1S4-12)
Nominal Impedance (ea)
2-Ohm
Internally wired to create a 2-Ohm amplifier load
Power Handling (Watts RMS)
500 Watts RMS
1000 Watts Max
Enclosure Material
5/8″ MDF (Medium Density Fibreboard)

Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)

15.125″ x 33.875″ x 15.75″
(38.4cm x 86cm x 40cm)

Woofer Size
12″
Enclosure Type
Vented
Speaker Connector
Up to 10 AWG compression terminals

R500X1D AMPLIFIER

The Prime R500X1D is a 500 watt mono amplifier using efficient Class-D circuit topology. This amplifier is capable of running a 2-Ohm load and includes on-board Punch Bass and remote Punch Level Control.

FEATURES:
•12dB/octave Butterworth crossover
•RCA pass-thru outputs
•On-board Punch EQ with +18dB boost @ 45Hz
•High level inputs
•Remote PLC (Punch Level Control)
•0°/180° Phase Switch
•Real time output and power supply thermal sensing
•Cast aluminium heat-sink
•4 Gauge power/ground connectors
•MOSFET power supply
•Over current protection
•Short circuit protection
•Muted turn on

CEA-2006 Power Rating
300W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels
1
Total Power
(Sum of Rated Power)
500 Watts RMS
Rated Power
(RMS Continuous Power)
300 Watts x 1 @ 4-Ohms
500 Watts x 1 @ 2-Ohms
Dynamic Power
(PVC/Power-Cube®)
333 Watts x 1 @ 4-Ohms 0° Res
647 Watts x 1 @ 2-Ohms 0° Res
Bridgeable
No
Frequency Response
20Hz to 250Hz +/-1dB
Input Sensitivity
150 mV to 4 V
Circuit Topology Class
Class D
Efficiency (average)
89% @ 4-Ohm
Total Harmonic Distortion (THD + Noise)
4-Ohm: <1.0% 2-Ohm: <1.0% Signal Input High Level: 4-pin moulex Low Level: 1 RCA Pair Signal Output Low Level: 1 RCA Pair Tone Controls Punch Bass: 0dB to +12dB @ 45Hz Phase Control: Variable 0° to 180° Crossover Controls Low-Pass (LP): 50Hz to 250Hz @ 12dB/octave Butterworth Remote Controls Punch Level Control: When connected is linked to "gain control" to provide remote output level Visual Indicators Power Protect Power Wire Gauge 4 AWG Power Input Connector Screw Terminal Speaker Wire Gauge 8 AWG Speaker Output Connector Screw Terminal Cooling Convection Heat-sink Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 50 A Average Current Draw (13.8V Music) 25 A Max. Current Draw (13.8V Sine-wave) 50 A Dimensions (H x W x D) 1.98 x 6.77 x 8.5 (in) 5.02 x 17.19 x 21.59 (cm) 4 GAUGE WIRING KIT INCLUDED IN THE PACKAGE

Additional information

Weight 60 kg
X
X