09 630 0677 dsmteden@xtra.co.nz

415 Dominion Road, Mt Eden, Auckland 1024

Sale!

ROCKFORD R1-1X12 SUB & R150X2 AMP & WIRING KIT PACKAGE

$599.00 $399.00

2 in stock

Description

*THIS SUB PACKAGE IS VERY HEAVY FOR FREIGHT SO PLEASE INQUIRE FIRST FOR THE EXACT SHIPPING COSTS AS EXTRA FREIGHT CHARGES WILL APPLY FOR VARIOUS DESTINATIONS AND RURAL DELIVERIES

The Prime R1-1X12 is a single 12” sealed enclosure that provides great low bass response at an incredible value. The enclosure is constructed with durable MDF (Medium Density Fibreboard) and covered in resilient high-density carpet. The subwoofer features Rockford Fosgate’s signature Anodized aluminium voice coil former to deliver superior power handling over the competition.

•Constructed with 5/8″ MDF
•Covered with high density carpet
•High current binding posts

SUBWOOFER SPECIFICATIONS:

Woofer Size
12″
Woofer Series
Prime (R1S4-12)
Nominal Impedance (ea)
4-Ohm
Internally wired to create a 4-Ohm amplifier load
Power Handling (Watts RMS)
200 Watts RMS
400 Watts Max
Enclosure Material
5/8″ MDF (Medium Density Fibreboard)
Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)

H 14.37″ x W 17.72″ x D1 7.14″ x D2 12.51″
36.5cm x 45cm x 18.1cm x 31.8cm

Woofer Quantity
1
Enclosure Type
Sealed
Speaker Connector
Up to 12 AWG compression terminals

ROCKFORD R150X2 AMPLIFIER

Rockford Fosgate amplification at an unbelievable value. The R150X2 2-channel amplifier pumps out more than enough to power a set full-range or component speakers, or you can bridge it into a 4-ohm load to produce 150 watts for a single R1S410 10″ or R1S412 12″ woofer. Check out our RFTECH:Woofer WiringWizard to get the most out of your amplifier.

•12dB/octave Butterworth crossover
•On-board Punch EQ with +18dB boost @ 45Hz
•RCA pass-thru outputs
•High Level Input (4-pin)
•Real time output and power supply thermal sensing
•Cast aluminum heatsink
•4 Gauge power/ground connectors
•MOSFET power supply
•Over current protection
•Short circuit protection
•Muted turn on
CEA-2006 Power Rating
50W x 2 @ 4Ω
≤1.0% THD+N

Number of Channels
2
Total Power
Rated Power
(RMS Continuous Power)
50 Watts x 2 @ 4-Ohm
75 Watts x 2 @ 2-Ohm
150 Watts x 1 @ 4-Ohm Bridged

Dynamic Power
(PVC/Power Cube®)
61 Watts x 2 @ 4-Ohms 0° Res
94 Watts x 2 @ 2-Ohms 0° Res

Bridgeable
Yes
Frequency Response
20Hz to 20kHz +/-1dB
Input Sensitivity
150 mV to 4 V
Circuit Topology Class
Class A/B
Efficiency (average)
66% @ 4-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%

Signal Input
High Level: 4-pin molex
Low Level: 1 RCA pair
Signal Output
Low Level: 1 RCA pair
Tone Controls
Punch Bass: 0dB to +12dB @ 45Hz
Crossover Controls
High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth
Visual Indicators
Power/Protect LED
Power Wire Gauge
4 AWG
Power Input Connector
Screw terminal
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Screw terminal
Cooling
Convection
Heatsink
Operating Voltage
9 – 16 VDC
Recommended Fuse
(not included)
20 A
Average Current Draw (13.8V Music)
10 A
Max. Current Draw (13.8V Sinewave)
20 A
Suggested Alternator
75 A
Dimensions (H x W x D)
5 x 17.2 x 28.5 (cm)

Additional information

Weight 25.00 kg
X
X