The P1-1X12 is a single P1 12” vented enclosure with 250 Watts RMS power handling wired to a 4-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We’re not talking junk in the trunk, we’re talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8″ MDF and tuned by our computer aided design software. P1 Loaded Enclosures feature similar tonal performance as P2/P3 models, but are easier to move in-n-out of vehicles due to their lighter weight.

• Constructed with 5/8″ MDF
• Proprietary high-flow, low-noise port
• High current binding posts

Speaker Connector

Up to 10 AWG compression terminal

CEA-2031 Compliant

Woofer Series

Punch P1 (P1S4-12)

Nominal Impedance (ea)

4-Ohm
Internally wired to create a 4-Ohm amplifier load

Power Handling (Watts RMS)

250 Watts RMS
500 Watts Max

Enclosure Material

5/8″ MDF (Medium Density Fiberboard)

Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)

15.125″ x 19.125″ x 15.75″
(38.4cm x 48.6cm x 40cm)