Description
POWERFUL AND VERSATILE
The FPX 1.1000 is a very compact mono amplifier with a power of 420 Watts RMS at 4 Ohms. Specially designed for powering a subwoofer, this amplifier combines very high power and some great features. Stable at 2 Ohms and 1 Ohm, equipped with a complete range of settings for adjusting low-frequency sensitivity, a remote control and output lines, this amplifier is capable of bluffing performances. Whether it’s for powering an audiophile bass system or a powerful subwoofer, the FPX 1.1000 will meet all your needs for your bass channel.
- – Mono Class D amplifier
- – Complete range of settings (active crossover, subsonic filter, bass boost, phase control)
- – Stable under 2 Ohms and 1 Ohm
- – Output lines
- – The FPX 1.1000 only measures (29.7 x 13.2 x 5.3 cm)
Key points
• D Class Mono amplifier – High power and current dynamic reserve
• Stable under 1 Ohm
• Audio Mos-Fets – Optimized efficiency
• High performance compact heat dissipation chassis
• Included remote
• D Class Mono amplifier – High power and current dynamic reserve
• Stable under 1 Ohm
• Audio Mos-Fets – Optimized efficiency
• High performance compact heat dissipation chassis
• Included remote
SPECIFICATIONS:
DUAL OUTPUT – POWERFULL AND COMPACT
• High performance compact
heat dissipation chassis.
• High power and current
dynamic reserve. • Audio Mos-Fets – Optimized efficiency.
Performance
CEA power (4 ohms): 1×420 Wrms
Maximum power (2 ohms): 1×700 Wrms
Maximum power (1 ohm): 1×1000 Wrms
Bandwidth: 15 Hz – 250 Hz
Total harmonic distortion: 0.08 %
SNR (1W/A):> 76 dBA
Low-pass filter: 50Hz-250Hz
Subsonic filter: 10Hz-50Hz
Progressive phase adjustment (0-180°)
Bass boost (0/12dB)
Protections: Short circuit / low impedance /
reversal of polarity / DC / power drop / heat
protection
Dimensions (LxHxW):
297x132x53mm
DUAL OUTPUT – POWERFULL AND COMPACT
• High performance compact
heat dissipation chassis.
• High power and current
dynamic reserve. • Audio Mos-Fets – Optimized efficiency.
Performance
CEA power (4 ohms): 1×420 Wrms
Maximum power (2 ohms): 1×700 Wrms
Maximum power (1 ohm): 1×1000 Wrms
Bandwidth: 15 Hz – 250 Hz
Total harmonic distortion: 0.08 %
SNR (1W/A):> 76 dBA
Low-pass filter: 50Hz-250Hz
Subsonic filter: 10Hz-50Hz
Progressive phase adjustment (0-180°)
Bass boost (0/12dB)
Protections: Short circuit / low impedance /
reversal of polarity / DC / power drop / heat
protection
Dimensions (LxHxW):
297x132x53mm
