Description
The optional RUX-KNOB2 remote bass control knob plugs right in to the Alpine Amplifiers for quick direct subwoofer control to make bass adjustments on the fly.
The RUX-KNOB.2 remote level controller works with Alpine’s amplifiers so you can manage your bass level from the front of your vehicle. This handy little knob adjusts your amp’s level from its set maximum volume all the way down to virtually “off.” Since it adjusts level and not “bass boost,” you’ll maintain the same bass tone as you turn the volume up and down.
Get full control over your amplifier, conveniently from inside the car. With the RUX-KNOB2 installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
The RUX-KNOB2 comes with a 5 meter cable that simply plugs into your amplifier.
Overview: The Alpine RUX-KNOB.2 is a Remote Bass Level Control for compatible Alpine amplifiers. It allows you to adjust the bass output of the amplifier remotely from the driver’s seat. The RUX-KNOB.2 comes with a 5-meter (16.4 feet) cable with an easy plug-‘n-play installation.
Compatibility: The RUX-KNOB.2 is designed for controlling the overall output level of Alpine mono amps, the level of bridged channels 3/4 of 4-channel amps, or the subwoofer channel of 5-channel amps. It is compatible with the following Alpine amplifiers (as of August 2017):
- X Series: X-A70F, X-A90V, X-A90M
- PDX Series: PDX-M12, PDX-M6, PDX-V9
- R-A60F, R-A75M, S-A32F, S-A55V, S-A60M,
- MRX Series: MRX-M55, MRX-M110, MRX-M240, MRX-M50, MRX-M100, MRX-M200, MRX-V60, MRX-V70
Note: The RUX-KNOB.2 can be used with amplifiers that are compatible with the older RUX-KNOB.
Rotary Control: The Alpine RUX-KNOB.2 is equipped with a rotary knob for adjustment of your connected amplifier’s bass level. The remote has an adjustment range of 0 (max) to -20dB (min).
Mounting: The RUX-KNOB.2 features two mounting flanges for mounting the knob on or under your dash. Four self-tapping screws are included.
