Description
DYNAMIC SOUND
6,5″ TWO-WAY COMPONENT KIT
The ES 165 K2 kit is composed of two 6½” (165 mm) woofers and has a very high sensitivity (92.8 dB/oct).The speaker drivers of the ES 165 K2 kit feature the K2 Power line’s famous yellow Kevlar® cones. Light, rigid and with excellent damping, they provide extremely dynamic sound and perfect definition. Paired with the new TMD suspension, there’s no distortion whatsoever. The phase plug in the centre of the cone improves sound dispersion around the vehicle.
The treble is reproduced by the two ‘M’-shaped aramid-fibre TKM inverted dome tweeters equipped with high-fidelity bi-amplified crossovers. High frequencies (up to 22 kHz) are perfectly reproduced, smoothly and with precision.
The speaker drivers used for the K2Power have been completely redesigned. Each component is the result of extensive research in acoustics to push back the limits of performance, of power and of precision! The K2Power Kevlar® cone, a product of unique expertise Made In Focal, is to this day second to none. Composed of an ultra-light foam structure sandwiched between a thin layer of Kevlar® aramid fibres, and a layer of glass fibres, the K2Power cone combines three key factors of quality acoustics:
- Rigidity
- Lightness
- Damping, for precise and dynamic sound.
The new K2 Power TKM tweeter features an exclusive “M”-shaped structure. This new-generation aramid-fibre inverted dome tweeter provides great precision in the very high end, and its combination with a “push-pull” motor with IAL2 technology extends the low end of the frequency response and provides extraordinary harmonic balance
The progressive spider profile of K2 Power speaker drivers is designed to provide a full-bodied sound at low levels and to increase linearity, precision and dynamic range
The new Radial VC cooling system for speaker driver voice coils expels hot air from the voice coil towards the bottom of the magnet through 6 holes. This improves control over the voice coil temperature, limiting the effects of thermal compression and improving reliability. This significantly increases the efficiency of the speaker driver. It also improves dynamics and produces a more powerful sound
The components used for the new K2 Power crossovers were selected specifically and optimised in order to improve control over the effects of heat dissipation. These components, which are fundamental to managing the various channels and for the soundstage, are now even more reliable.
WHAT MAKES THE DIFFERENCE
• Inverted dome “M”-shaped tweeter
• High sensitivity (92.8dB/oct)
• Bi-Amp
• Audiophile grade crossover
TECHNICAL CHaractEristiCS
2-way component kit
Diameter: 6½” (165mm)
Voice coil diameter: 11/4″ (32mm)
Voice coil height: 05/8″ (15mm)
Motor: Magnet
Tweeter: TKM (“M” profile aramid fiber
inverted dome)
Cone: Composite K2 Power “W” sandwich cone
Surround: Tuned Mass Damper (TMD®)
Separated crossover: 6-12/12dB (3.5kHz)
Tweeter Adjustable level: +3; 0; -3dB/oct
Max. power: 200W
Nom. power: 100W RMS
Sensitivity (2.83V/1m): 92.8dB
Frequency response: 60Hz- 22kHz
Impedance: 2 Ω
Accessories: Supplied grilles
Specifications
Nominal power 100W
Maximum power 200W
Sensitivity (2,83V/1m) 92.8dB
Cone Kevlar sandwich
Nom. impedance 2Ω
Surround Butyl
DC resistance 1.8Ω
VC diameter 32mm 117⁄64″
Former Kapton
Layers 2
Wire CCAW
Magnet (d x h) 95x20mm 347⁄64×025⁄32″
Net weight 1450g 3.20lbs
PARAMETERS
Rdc 1.8 Ω
Fs 67Hz
Mms 13g
Cms 0.41mm/N
Vas 10l
Qts 0.55
Qes 0.6
Qms 7
Bxl 4.2 N/A
Sd 128.6cm2
SPL 89.8dB
Xmax 4.8mm
