Description
Hook into your car’s factory system
One of the best ways to add an amplifier or powered subwoofer to a factory system is with a line output converter (LOC), which reduces the factory system’s high-level outputs down to the preamp-level signals your aftermarket amp can handle. PAC’s LPA-2.4 LocPro Advanced line output converter will work with just about any factory system, even amplified premium systems, to help you add an aftermarket amplifier in your vehicle.
Integration features
The LPA-2.4 active line output converter lets you add an amp without affecting the existing factory system — you just tap into the wires going to a pair of full-range speakers for the LPA-2.4’s inputs. Selectable load resistance and ground isolation options ensure trouble-free OEM integration. Gain control with clip lights adjust the signal level for optimum strength and fidelity. A low-pass filter and bass boost fine-tune the bass to sound its best.
Product highlights:
- 4-channel active line output converter
- 2 channels in, 4 channels out — no fade function
- designed to work with most factory systems
- speaker-level inputs (0.5-40V)
- can handle up to 400 watts RMS per channel
- selectable input loads for OEM integration (20, 60, or 20,000 ohms)
- dual variable gain controls with clip indicators
- selectable low-pass filter (250 Hz) on rear channels
- variable bass boost (0-12dB at 45 Hz) on rear channels
- up to 9.5 Vrms output
