[email protected]

415 Dominion Road, Mt Eden, Auckland 1024

Sale!

ROCKFORD FOSGATE T1500-1BDCP MONOBLOCK AMP!HIGH END AMP MADE WITH PRECISION!

$1,599.00

or from $99.00 today & 5 weekly interest-free payments of $300.00 with Laybuy

1 in stock

Description

T1500-1bdCP

Power 1,500 Watt Class-bd Constant Power Amplifier

The Power T1500-1bdCP is a 1,500 Watt mono amplifier featuring Constant Power delivering up to 25% more power across all impedance loads. The frequency response of the T1500-1bdCP is optimized exclusively for use with subwoofers in cars and trucks.
The T1500-1bdCP 1500-watt amp includes:

24dB/octave crossover

  • MOSFET power supply
  • MOSFET output stage
  • 4 Gauge power/ground connectors
  • Audiophile grade speaker connections
  • RCA pass-thru outputs
  • Infrasonic filter

T1500-1bdCP

The new Constant Power amplifiers are the most powerful amplifiers on the market PERIOD! The T1500-1bdCP is an amplifier for subwoofers based on the legendary T1500-1bd amplifier design with a proprietary “Constant Power” configuration delivering up to 25% more power (Watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. At 1,500 watts, this monster will run any demo vehicle competing in Sound Pressure Level.

CEA-2006 Compliant: CEA-2006 Power Rating
1000W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels: 1
Rated Power
(RMS Continuous Power):
1000 Watts x 1 @ 4-Ohm
1500 Watts x 1 @ 2-Ohm
1500 Watts x 1 @ 1-Ohm
Total Power
(Sum of Rated Power):
1500 Watts RMS
Dynamic Power
(PVC/PowerCube®):
1045 Watts x 1 @ 4-Ohms
1549 Watts x 1 @ 2-Ohms
1715 Watts x 1 @ 1-Ohm
Bridgeable: No
Frequency Response: 20Hz to 250Hz +/- 0.5dB
Efficiency (average): 86.2% @ 4-Ohm
74.6% @ 2-Ohm
63.0% @ 1-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Crossover Controls: Low-Pass (LP): 35-250Hz 24dB/octave Butterworth
Tone Controls: Bass: 0dB to +18dB @ 45Hz
Infrasonic Filter: -3dB @ 28Hz 12dB/Octave
Input Sensitivity: 150 mV to 5 V
Signal Input: Low level: 1 RCA pair
Signal Output: Low Level: 1 RCA pair
Power Input Connector: Block
Power Wire Gauge: 4 AWG
Speaker Output Connector: Screw terminal barrier strip
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Remote Punch Bass EQ
(overrides built-in Punch Bass EQ)
Visual Indicators: Power
Thermal
Protect
Circuit Topology Class: Class-BD
Operating Voltage: 9 – 16 VDC
Recommended Fuse
(not included):
200 A
Max. Current Draw (13.8V Sinewave): 200 A
Average Current Draw (13.8V Music): 100 A
Suggested Alternator: 100 A
Shipping Weight: 14.35 Lbs. (6.50 Kg.)
Dimensions (H x W x D): 2.14 x 8.14 x 14.91 (in)
5.42 x 20.68 x 37.86 (cm)
Dimensional Diagram:

Additional information

Weight 8.0 kg
Wishlist 0
Continue Shopping
X
X