Description
Power 400 Watt 4-Channel Amplifier T400-4
The Power T400-4 is a 4-channel amplifier capable of producing 100 Watts into each of its four channels at 2-Ohms. The T400-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear.
The T400-4 amplifier is perfect for front/rear fading stereo systems or when dedicated amplification is required between front stage speakers and rear subwoofer(s). Thanks to the Dynamic Thermal Management, the small chassis design insures it can be installed in any location – like under front seats.
- 24dB/octave crossover
- 2/4 channel input switch
- MOSFET power supply
- MOSFET output stage
- 4 Gauge power/ground connectors
- Audiophile grade speaker connections
CEA-2006 Compliant
CEA-2006 Power Rating60W x 4 @ 4Ω
≤1.0% THD+N
Cta-2006 Compliant
Number of Channels
4
Total Power
(Sum of Rated Power)
(Sum of Rated Power)
400 Watts RMS
Rated Power
(RMS Continuous Power)
(RMS Continuous Power)
60 Watts x 4 @ 4-Ohm
100 Watts x 4 @ 2-Ohm
200 Watts x 2 @ 4-Ohm Bridged
2-Ohm x 2 Bridged Stable
100 Watts x 4 @ 2-Ohm
200 Watts x 2 @ 4-Ohm Bridged
2-Ohm x 2 Bridged Stable
Dynamic Power
(PVC/PowerCube®)
(PVC/PowerCube®)
84 Watts x 4 @ 4-Ohm 0° Res
139 Watts x 4 @ 2-Ohm 0° Res
272 Watts x 2 @ 4-Ohm Bridged
139 Watts x 4 @ 2-Ohm 0° Res
272 Watts x 2 @ 4-Ohm Bridged
Bridgeable
Yes
Frequency Response
20Hz to 20kHz +/- 1dB
Input Sensitivity
150 mV to 4 V
Circuit Topology Class
Class A/B
Efficiency (average)
69% @ 4-Ohm
68% @ 2-Ohm
68% @ 2-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
2-Ohm: <1.0%
Signal Input
Front Low level: 1 RCA pair
Rear Low level: 1 RCA pair
Input Switch: 2CH / 4CH
Rear Low level: 1 RCA pair
Input Switch: 2CH / 4CH
Signal Output
n/a
Tone Controls
Front Channels – Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45HzRear Channels – Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45HzRear Channels – Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Crossover Controls
Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Remote Controls
Optional Remote Punch EQ
(overrides rear channel built-in Punch EQ)
(overrides rear channel built-in Punch EQ)
Visual Indicators
Power
Thermal
Protect
Thermal
Protect
Power Wire Gauge
8 AWG to 4 AWG
Power Input Connector
Block
Speaker Wire Gauge
8 AWG to 18 AWG
Speaker Output Connector
Screw terminal barrier strip
Cooling
Convection
Heatsink
Operating Voltage
9 – 16 VDC
Recommended Fuse
(not included)
(not included)
60 A
Average Current Draw (13.8V Music)
30 A
Max. Current Draw (13.8V Sinewave)
60 A
Suggested Alternator
75 A
Dimensional Diagram
Dimensions (H x W x D)
2.14 x 8.14 x 13.66 (in)
5.42 x 20.68 x 34.69 (cm)
5.42 x 20.68 x 34.69 (cm)
