ROCKFORD FOSGATE T1000-1bdcp TOP MONO AMP**GREAT FOR SUBS

Description

IS IS ROCKFORD FOSGATE’S GREATEST INGENUINITY SO FAR!!!

YOU CAN SAY THIS IS A COMPLETE HORSEPOWER OF AN AMP!!!

The Power T1000-1bd is a 1,000 Watt mono amplifier featuring delivering up to 25% more power across all impedance loads. The frequency response of the T1000-1bd is optimized exclusively for use with subwoofers. 

• 24dB/octave crossover
• 4 Gauge power/ground connectors
• Audiophile grade speaker connections
• MOSFET power supply
• MOSFET output stage
• RCA pass-thru outputs
• Infrasonic filter

CEA-2006 Compliant:

Number of Channels:

1

Rated Power (RMS Continuous Power):

700 Watts x 1 @ 4-Ohm 1000 Watts x 1 @ 2-Ohm 1000 Watts x 1 @ 1-Ohm

Total Power (Sum of Rated Power):	1000 Watts RMS

Dynamic Power (PVC/PowerCube® Measurement):

956Watts x 1 @ 4-Ohms 1573 Watts x 1 @ 2-Ohms 1627 Watts x 1 @ 1-Ohm

Bridgeable:

No

Frequency Response:

20Hz to 250Hz +/-0.5dB

Efficiency (average):

85.6% @ 4-Ohm 82.1% @ 2-Ohm 70% @ 1-Ohm

Total Harmonic Distortion(THD+Noise):

4-Ohm: <1.0% 2-Ohm: <1.0% 1-Ohm: <1.0%

Crossover Controls:

Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz

Tone Controls:

Bass: 0dB to +18dB @ 45Hz

Input Sensitivity:

150 mV to 4 V

Signal Input:

1 RCA pair

Signal Output:

1 RCA pair

Power Input Connector:

Block

Power Wire Gauge:

4 AWG

Speaker Output Connector:

Block

Speaker Wire Gauge:

8 AWG to 18 AWG

Heat Sink Type:

Cast aluminum

Cooling:

Convection

Remote Controls:

Optional Remote PEQ (overrides built-in Punch Bass)

Visual Indicators:

Power (Blue LED) Thermal (Red LED) Protect (Yellow LED)

Circuit Topology Class:

Class-BD

Operating Voltage:

9 – 16 VDC

Recommended Fuse (not included):

150 A

Max. Current Draw (13.8V Sinewave):

140 A

Average Current Draw (13.8V Music):

70 A

Suggested Alternator:

100 A

Shipping Weight:

12.2 Lbs. (5.53 Kg.)

Dimensions (HxWxL):

2.14 x 8.14 x 13.66 (in) 5.44 x 20.68 x 34.69 (cm)